Ruby Twist Injector – Kit Cheap
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
A brand new addition to our Twist line-up, we have designed the Ruby Twist to provide even higher performance version of the Thermal Twist! In the Ruby Twist we have replaced the metal core of the housing with a reservoir filled with gemstone cut rubies but have retained a Twist airflow widget underneath the rubies to provide the spinning airflow which provides the super even heat distribution to the contents of your bowl and super fast vapor production, setting it apart from other injector vape. The Ruby Twist has been designed to rival any of the 20mm coil driven injector vapes and in most cases surpasses them in performance and flavour.Â
Due to having a gemstone cut ruby filled reservoir along with the Twist airflow widget, the Rubies Twist provides almost instant vapor production and better flavour than the original Thermal Twist, which itself is no slouch in these departments! The Gemstone reservoir also allows lower temperatures to be set on the PID controller, instead of running between 300-370C the Ruby Twist runs between 270-330C, with our preferred temperatures when using the standard bowl being around 305C.Â
The Ruby Twist was designed by us in collaboration with Crossing Tech to bring a highly effective and competitively priced injector vape to the market (we are also making a diffuser bowl as there s plenty of heat for conduction!).
Being a more premium option the Ruby Twist is only available with a Grade 2 Titanium housing and spinner. The vortex airflow provided by the Twist widget removes the need to stir your bowl when used with around 0.1.5-0.2g loads as the hot air does the work for you, removing one additional step while vaping! Just load in a a SQP of herb, place the housing on the bowl, inhale, then watch it spin up and settle in to place! There s no need to tamp your bowl as the airflow will do this for you too! Due to the spinning airflow the Ruby Twist also makes an excellent micro-doser, happily vaporizing down to around 0.05g (we haven t tested with less… it would still vape less). If you re interested in a more dedicated setup, we also have a Microdose Diffuser Bowl available.Â
Designed with a simplified user experience in mind, the Ruby Twist comes fully set up with a handle installed on the heater coil and the housing fully set up, making for a plug and play experience without the possibility of mis-installing the handle during setup! Plug the heater into the front of the PID, the power adapter plug into the back, turn it on, set your temp and it s ready to go (initial burn off cycle advisable, details below)! The Stand has been designed to provide minimal contact with the housing, meaning the heat stays where it should be, inside the housing and not being transferred into your stand, or worse, into the surface below!Â
Capable of providing anything between low temp terpy hits, to thick clouds. The Ruby Twist has fairly fast vapor production and exceptionally smooth vapor!Â
This kit comes with everything needed to get started, aside from a glass Rig or Bubbler (optionally available) and herb.Â
Suggested set temperature range on the PID: 270c-330c (518f-626f) but as with everything… use it as you like it! Though we wouldn t advise going much hotter as you might combust! We have customers who run this as low as 250C set on the PID controller.Â
Check out the review video by Tabletop Bong, thanks Lee!
Â
Includes
- Ruby Twist Injector with Gemstone Cut Rubies Inside (GR2 Titanium Housing)Â
- Crossing Technology Micro PID (1c 1f) (CE ROHS Certified) –Â UK VERSION COMES SET TO CELCIUS!!Â
- 20mm Heater Coil with Silicone Handle Pre-installed (UK EU 220v or US 110v variants)
- Pre-installed Heat Guard for the Rubies Twist HousingÂ
- Thermal Twist Glass Bowl with a 14.4mm Side-Carb (approx. 0.4g max capacity) – 14.4mm Male Joint BowlÂ
- 14.4mm to 18.8mm Male AdapterÂ
- Keck ClipÂ
- Steel Stand
- SQP – Scoop and TamperÂ
- Wood Cleaning Brush
- Spare Screens Pack for Bowl
- Spare Screens Pack for Housing (not needed unless you re a DIYer, want to change the gemstones inside and lose the original screen!)
- UK 3-pin Plug or 110V 2-Pin US Plug (variant dependent) – For EU customers we will add in an EU plug
- Instructions Sheet
- For 10% off our Chugga-Jug Bubbler when purchased with this setup, please use discount code ChugChug at checkout.Â
- We provide a one year warranty on the PID controller and Heater Coil.Â
- Broken glassware should be reported on arrival. Please photograph this in it s packaging so improvements can be made where required.Â
-
- If using the 14mm bowl with the keck clip and 18mm adapter, when you install the 14mm bowl into the 18mm joint give it a little push and twist to help the two joints lock together, then install the keck clip. This will help prevent the joints rotating unintentionally
- Unless using this setup with the diffuser bowl (not included, coming soon) it is not advisable to leave the Thermal Twist housing on the bowl. Place the housing on the bowl, inhale, remove the housing setup and place it safely on the stand
- To avoid the herb being additionally compacted there is a side carb stopper integrated into the bowl, you can remove this stopper to assist in clearing the bubbler of excess vapor
- The Heat Guard extends past the bottom of the injector housing for maximum protection, this also helps align the bottom of the injector housing into your bowl for added convenience and makes it very hard to miss! We only mention this as those of you who are already using injector vapes will be unused to this system as with most devices you have to watch closely to ensure the injector is neatly placed into the bowl.Â
- Check out the Portavb Universal Debowler, a great solution for emptying your bowl after vaping!Â
- The Thermal Twist works really nicely with hash (not bubble), if you double up the mesh screens then break up the material small but not too finely and place some on the top screen it s pretty effective. Â
- The Microdose Diffuser bowl is also great as you can place some into the screen, then place another screen on top to trap it inside the bottom screen. With a little heat soak especially this is highly effective.Â
- Hold the central button for 5 seconds to turn on or off
- Use the + – buttons to adjust the temperature
- When switched on, press the central button five times to access auto-off timer
- Adjust with + – from 0-5. 0 switches the timer off or select 1-5 hours
- Celcius Fahrenheit – Hold down + button for 5 seconds while the controller is switched off. Then press the + button again to change between C and F. Press the central button to exit.Â
-
Â
Fun features
The Ruby Twist can be used with the 18mm C C Quartz Cap vaporizer by the rogue wax works. Just pop the housing over the top of the glass chamber section and use your Quartz Cap vaporizer as a diffuser style bowl! With or without heat soak! If heat soaking you can adjust the mesh screen inside the Quartz Cap chamber so that it sits higher up for a full hybrid experience. You will want to reduce the temps on your pid by around 70-100c if doing this.Â
We also now have the Thermal Twist Microdose Diffuser Bowl which has been made specifically for these setups!
Â
Â
Â
Caution Note
1. Do not leave the Housing head in the glass bowl to heat up. As it heats the metal and glass expand and the housing can become stuck in the glass which can cause the glass to break.Â
2. Always use the provided stand for storage, do not store the housing installed on the bowl as over time this can damage the bowl.
3. Please note the temperature is set to Celsius if you are in UK, EU or AU and Fahrenheit if you are in US or Canada by default.Â
PID Controller InstructionsÂ
Â
Usage notes
Â
Warranty Info
| UK or US Variant | 220V UK/EU Variant, 110V US Variant |
|---|
Related products
-
SNAKE A4 PRINT Supply
$4.48
